7 Segment Display Panel

Introduction:

The seven segment display panel is a useful add-on for eLabtronics development hardware. The size of the display panel is 90mm x 121mm and it provides a clear visual output. Together with the eLab16m controller and the 8segDriver board, seven segment display panels could be used to create your very own clock, timer or counter.
To enable display on the seven segment panel, an eLabtronics 8segDriver Board is required.

8Seg Driver Board

Contents:

• Printed Circuit Board (PCB)
  • Tinned and Solder Masked
  • Component Overlay Diagram (on top)

• Various Electronic Components
  • 8x 920ohm Resistor
  • 1x 100 uF Electrolytic Capacitor
  • 1x 100nF Ceramic Capacitor
  • 3x 16-pin IC Socket
  • 16-pin Microcontroller IC
  • 2x 2-way PCB Terminal Block
  • 2x 3-way PCB Terminal Block
  • 2x PCB Mount Screw Terminals
  • 1x Wire Link

Price

AU$22.00	(Seven Segment Display Panel)
AU$19.80	(8Seg Driver Board)