Features
The MDriver is a quadruple
high-current half-H driver. It is designed to provide
bi-directional drive currents of up to 600mA from 4.5 volts to 36
volts DC. This device is designed to drive inductive loads such as
relays, solenoids, DC and bipolar stepping motors in positive
supply applications.
The MDriver module is designed for
use with the eLab6 microcontroller module for interfacing with
small DC motors or solenoids. The module can be powered from the
same 4.5 volt power supply as the eLab6 to control a small 3 volt
motor. Higher voltage motors of 4.5 to 36 volts can be used with
the MDriver by using a separate regulated
supply connected to pin 8. A 220nF polyester capacitor has been
connected directly across the motor terminals to prevent motor
noise from interfering with the circuit.
Kit Contents
Printed Circuit Board
Various Electrical Components
-
100uF Electrolytic Capacitor x 1
-
100nF Ceramic Capacitor x 3
-
16 Pin IC Mount x 1
-
16 Pin L293D H Driver IC x 1
-
3 Way Terminal Block x 4
Price
Built and tested - AU$11.00
inc. GST
Related links
>
eLab6
|
